<h3><b>Knowledge Article Contents</b></h3>
<div style='margin-left: 40px;'><b>Section (1): Feature Overview<br>Section (2): System Requirements<br>Section (3): How to Link Ring to the Lutron App</b><span style='font-size: 13px;'> </span></div>
<div style='margin-left: 40px;'><b>Section (4): How to Program Ring Cameras to activate lights in the Lutron App</b></div><h3><b>Section (1): Feature Overview</b></h3>
<ol><li>You can configure your Ring devices to turn on selected Lutron lighting zones when the Ring device detects motion, or the doorbell is pressed.
<ol><li>Motion events and doorbell presses can control separate lighting zones (ex. Motion events turn on external lights, doorbell press turns on foyer light)</li><li>You can specify that Ring events will only turn lights on "at night" (after sunset, but before sunrise)</li><li>You can also manually disable and re-enable a previous programmed Ring event.</li></ol>
</li><li>Ring events will always send Lutron lighting zones to 100% brightness when triggered (on level is not configurable)</li><li>Lighting zones which have been turned on due to a Ring event will always return to their previous level after 15 minutes (return level and 15 min timeout are not configurable)
<ol><li>If the zone level changes within that 15 minute window (timeclock, button press, any other user action), then the timeout is canceled.</li></ol>
</li></ol>
<h3><br><br><b>Section (2): System Requirements</b></h3>
<h4><b>Lutron Lighting Systems<br><br>Caseta</b> with Hub (formerly Bridge) L-BDG2-WH or Pro L-BDGPRO2-WH</h4>
<ul style='margin-left: 40px;'><li>Lutron Hub firmware version must be<strong> at least 08.03.xx </strong>for the feature to work</li><li>
<p>Lutron App version must be <strong>at least 7.3.x </strong>for the feature to work. </p>
</li></ul>
<div><b>RA2 Select Systems<br>RadioRA 3 Systems</b><br><b>HomeWorks QSX </b> <b>Systems</b><br><br><b>Supported Ring Devices</b></div>
<h4 style='margin-left: 40px;'><a href='https://ring.com/doorbell-cameras' target='_blank'><u><b>Video Doorbells</b></u></a> </h4>
<h4 style='margin-left: 40px;'><b><b><a href='https://shop.ring.com/pages/security-cameras' target='_blank'>Security Cameras</a></b></b></h4>
<h4 style='margin-left: 80px;'><u><b>Note:</b></u> For floodlight cameras, Lutron cannot control built-in floodlights. But we can use the camera to turn on Lutron controlled lights when it detects motion.</h4>
<div style='margin-left: 40px;'><b><a href='https://shop.ring.com/pages/security-system' target='_blank'>Ring security device</a></b> are <u><b>NOT SUPPORTED</b></u></div>
<h4><b>Network Requirements:</b></h4>
<ol><li>At configuration time (initial linking of Lutron and Ring accounts & programming which Ring devices control which lighting zones), the mobile app MUST have an internet connection and the hub MUST have an internet connection.</li><li>At runtime (doorbell rings or motion events actually turning on lights), the hub and Ring device MUST have an internet connection.</li></ol>
<h3><b>Section (3): How to link RING to the Lutron App</b></h3>
<br>Linking your RING device to your Lutron Lighting Control system via the Lutron App can be completed in 4 easy steps:<br>
<ol><li>In Lutron App go to <b>Settings</b> > <b>Add Device</b> > and click <b>"Works with Ring"</b></li></ol>
<div style='margin-left: 40px;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 539px;height: 539px;'></img></div>
<ol start='2'><li>You will see an onboarding screen. Select <b>"Link Ring Account"</b></li></ol>
<div style='margin-left: 40px;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 283px;height: 562px;'></img></div>
<ol start='3'><li><b>Authorize</b> -> <b>Enter Ring credentials</b> ->Re-enter with two factor authentication <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 576px;height: 575px;'></img></li><li><b>Authorize</b> -> <b>Ring Device</b></li></ol>
<div style='margin-left: 40px;'> </div>
<div style='margin-left: 40px;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 576px;height: 575px;'></img></div>
<div style='margin-left: 40px;'><b>CONGRATULATIONS! </b> Linking should now be complete. Verify Ring Integration by checking the "Settings" screen for any phone using the linked Lutron account. <br> <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 283px;height: 562px;'></img></div>
<h3><b>Section (4) Programming the Ring Cameras to the Caseta Lights with the Lutron App</b></h3>
<ol><li>After linking the accounts you should see a screen similar to the one below</li></ol>
<div style='margin-left: 40px;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 296px;height: 579px;'></img></div>
<ol start='2'><li>
<p>When you click on any of the above options, you will be able to set up Lutron programming for your Ring devices. In these screens, you can choose which lights to turn on for the associated Ring device and whether this programming should happen all the time or whether it should only be effective at night.</p>
<p><b>NOTE: To save changes, you will want to tap on Save in the top right corner.</b><br> <br> <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 575px;height: 567px;'></img><br> <br> 3. Once you have set up the programming, the "Works with Ring" screen will show icons like seen below.<br> <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 296px;height: 579px;'></img><br> <br> <b>Congratulations! </b>You have now linked Ring and programmed it to your Caseta System.</p>
</li></ol>
<div id='' style='left: 60px;top: 5149.94px;'> </div>
This article will go over the steps to integrate your Ring Doorbell or Stick up cameras to your Lutron Lighting system via the Lutron App.
RING Integration