<p>Using a <a href='https://assets.lutron.com/a/documents/369612.pdf&#039; target='_blank'>Pico Wireless</a> or <a href='https://assets.lutron.com/a/documents/085314.pdf&#039; target='_blank'>4-Group RF Remote Control</a> with your Palladiom Wire-Free shades allows you to adjust your shades from anywhere in the room, at the click of a button.  In addition to the ability to raise and lower your shades, you can also use the Preset “Favorite” button on the remote to immediately set the shades to a predetermined level. </p>

<p>Standalone applications refer to when Caseta, RA2 Select, RadioRA, or HomeWorks are not being used. </p>

<p><span style='font-size: 14px;'><strong>Step 1: Confirm that you have a Lutron Palladiom Wire-Free shade by the button style. </strong></span></p>

<p>Palladiom Wire Free Shades - The roller shade features a single LED-equipped control button (the ‘Shade Button’), located on the Electronic Drive Unit on the left- or right-hand side of the headrail. These shades are exclusively battery powered. </p>

<p><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 271px;height: 202px;'></img></p>

<p><span style='font-size: 14px;'><strong>Step 2: Verify standalone operation </strong></span></p>

<p>The Shade Button is used to activate and indicate various steps while assigning and programming the shade for compatible handheld or system-based remote control. </p>

<ol start='1'><li>
<p>Press the Shade Button on your Palladiom Wire-Free Shade and observe for a solid green indicator light.       <br>   <br> a. If the green indicator light remains illuminated, this indicates the shade is ready to be paired, follow step 3.1 to assign a Pico remote control, or step 3.2 to assign a Lutron 4-Group remote control. <br> b. If the green indicator light turns off within one second, this means your Palladiom Wire-Free Shade is connected to a Lutron smart home system. In this case, you must pair your remote to your Palladiom Wire-Free shade through your Lutron system. <br>               1. If a Caséta Smart Bridge or a RA2 Select system is installed, use the Lutron App to program and                         control the shade. <br>               2.If a RadioRA 3 or HomeWorks system is installed, use the Lutron Designer software to program your                  shade. Please visit <a href='http://www.lutron.com/wheretobuy&#039; target='_blank'>www.lutron.com/wheretobuy</a&gt; to find a local trained and certified Lutron Dealer.  </p>
</li></ol>

<p><span style='font-size: 14px;'><strong>Step 3: </strong></span></p>

<ol start='1'><li>
<p><strong>For Programming to a Pico Wireless Remotes</strong><br> a.<strong> </strong>Once the indicator light on your Palladiom Wire-Free shade is illuminated solid green, press and hold the “Close” or bottom button on your Pico Wireless Remote for 10 seconds.  <br> b. The indicator light on the Palladiom Wire-Free and Pico Wireless Remote will begin to flash green which indicates that pairing was successful. <br> c. Release the “Close” or bottom button on the Pico Wireless Remote. </p>
</li></ol>

<p style='text-align: center;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>      d. Repeat this process again, starting from Step 3.1.a., to pair a new Palladiom Wire-Free to the same remote or to          pair a second Pico Wireless Remote to the same shade. </p>

<p> </p>

<ol start='2'><li>
<p><strong>For Programming to a 4-Group RF Remote Controls </strong><br> <br> a. Once the indicator light on your Palladiom Wire-Free shade is illuminated solid green, you must press and hold one of the Shade Group buttons <br> <br> b. You should see that the green indicator light on the Palladiom Wire-Free shade will begin to flash which indicates that your 4-Group Remote has been successfully paired <br> <br> c. At this point, you can release the “Close” button on the 4-Group Remote.<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>
</li></ol>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; <br> </p>

<p>         d. Repeat this process again, starting from Step 3.1.a., to pair a new Palladiom Wire-Free shade to the same                     remote or to pair a second Pico Wireless Remote to the same shade. </p><br>