<p>A standalone application refers to when Caseta, RA2 Select, RadioRA, or HomeWorks are not being used. </p>

<p>The open and close limits determine the most open and the most closed points of travel for a window treatment. For a QS Wired, QS Wireless, or Palladiom shade, blind or drapery track, these limits can be set using the buttons on the drive itself.  </p>

<p>For QS / Palladiom Wired window treatments, these limits can also be programmed from a wired keypad. For QS / Palladiom Wireless window treatments, these limits can be programmed from a wireless keypad or remote that they are paired with. For help with any of these processes, please see the articles below.  </p>

<ul><li>
<p>Link to setting limits article on QS / Palladiom Wired shade via wired keypad </p>
</li></ul>

<ul><li>
<p>Link to setting limits article on QS / Palladiom Wireless shade via wireless keypad </p>
</li></ul>

<p><strong>QS Drive End:</strong></p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 205px;height: 191px;'></img><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 210px;height: 210px;'></img>          </p>

<p> <strong>Palladiom Drive End :</strong></p>

<p>              <img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 114px;height: 178px;'></img>                                                </p>

<p> </p>

<p><strong>Step (1): Setting the open limit </strong></p>

<p>On the pictures in these instructions, “T”= tap and “H”=hold. </p>

<p>1. Tap the open limit button and the indicator light on the drive will illuminate green </p>

<p><img alt='Diagram Description automatically generated' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p> </p>

<p>2. Press and hold the arrow buttons to move the window treatment to the preferred open limit. </p>

<p><img alt='Diagram Description automatically generated' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>3. Press and hold the open limit button until the green indicator light flashes. This indicates that the open limit has been stored. </p>

<p><img alt='Diagram Description automatically generated' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p><strong>Step (2): Setting the close limit </strong></p>

<p>1. Tap the close limit button and the indicator light on the drive will illuminate green </p>

<p><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>2. Press and hold either of the arrow buttons to move the window treatment to the preferred close limit. </p>

<p><img alt='Diagram Description automatically generated with medium confidence' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>3. Press and hold the close limit button until the green indicator light flashes. This indicates that the open limit has been stored. </p>

<p><img alt='Diagram Description automatically generated' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p><strong>Step (3): Verify that the limits are set properly  </strong></p>

<p>1. Press the open limit (white rectangle) button to check that the open limit is set where desired. </p>

<p><img alt='Diagram Description automatically generated' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>2. Press the closet limit (black rectangle) button to check that the close limit is set where desired.  </p>

<p><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage… src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p> </p>