Wire Your Sivoia QS / Palladiom Wireless Shade for Power

Please note: If a Sivoia QS / Palladiom shade is hardwired for power only, a Wireless Receiver (QSYC-J-RCVR) must be used to communicate with the shade. 
Article Contents:
<ol start='1' style='margin-bottom: 0in;margin-top: 0px;'><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'><a target='_self' href='#Step1'>Confirm that you have a Lutron Sivoia QS or Palladiom Wireless shade by identifying the button style and wireless receiver shown below. </a></li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'><a target='_self' href='#Step2'>Verify the Sivoia QS or Palladiom shade has a Wireless Receiver. </a></li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'><a target='_self' href='#Step3'>Wiring the Power Supply </a></li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'><a target='_self' href='#Step4'>Wire the Shade </a></li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'><a href='#Related' target='_self'>Related Articles</a> </li></ol>
<div align='center' style='margin: 0in;text-align: center;line-height: normal;font-size: 11pt;font-family: Calibri, sans-serif;'><hr align='center' width='100%' size='2'></hr></div>
<a id='Step1' target='_blank'></a>Step 1: Confirm that you have a Lutron Sivoia QS or Palladiom Wireless shade by identifying the button style and wireless receiver shown below. 
The Sivoia QS and Palladiom drives have 4 buttons separated in the middle by an LED Indicator Light. A small, pointed object such as a stylus is required to press any of these four buttons. 
1. A QS Drive has one black rectangular button and one white rectangular button on one side of the Indicator Light. On the other side of the indicator light is a counterclockwise arrow button and a clockwise arrow button 
 <img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='The four buttons on a Sivoia QS shade'></img> 
2. A Palladiom Drive has one square button and one round button on one side of the Indicator Light. On the other side of the indicator light is an arrow up button and an arrow down button. These buttons are accessed by rotating the finish ring on the drive end of the shade. 
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='The slide ring and four buttons hidden on a Palladiom Shade'></img> 
 
<div align='center' style='margin: 0in;text-align: center;line-height: normal;font-size: 11pt;font-family: Calibri, sans-serif;'><hr align='center' width='100%' size='2'></hr></div>
<a id='Step2' target='_blank'></a>Step 2: Verify the Sivoia QS or Palladiom shade has a Wireless Receiver. 
A wireless receiver (shown below) is required for wireless communication to a remote control. The wireless receiver may be located near the shade drive or mounted remotely anywhere between the shade and the power panel. 
QS drives usually have a wireless receiver mounted near the shade. 
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='The Lutron Wireless Adapter'></img> 
Palladiom shades are more likely to have the wireless receiver mounted in a remote location by using the Wireless Receiver Adapter (shown below) which is included with all Palladiom Wireless shades. 
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='The Y-adapter that comes with a Palladiom wireless shade.'></img> 
If no Wireless Receiver is present, the shade cannot be controlled with a wireless control. A QSM may be used as an alternative to connect a wireless remote. Otherwise, a Wireless Receiver can be purchased and installed. 
 
The Sivoia QS drive will have 4 buttons on the drive. There will be an indicator light located in the middle. A stylus is needed to press any of these four buttons. 
<div align='center' style='margin: 0in;text-align: center;line-height: normal;font-size: 11pt;font-family: Calibri, sans-serif;'><hr align='center' width='100%' size='2'></hr></div>
<a id='Step3' target='_blank'></a>Step 3: Wiring the Power Supply 
10-Output Panels: 
<ul style='margin-bottom: 0in;margin-top: 0px;'><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'>QSPS-10PNL - <a target='_blank' href='https://assets.lutron.com/a/documents/085335.pdf'>Sivoia QS Smart Panel Power Supply (lutron.com)</a> </li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'>QSPSY-10PNL - <a target='_blank' href='https://assets.lutron.com/a/documents/085355_EN.pdf'>Sivoia QS Smart Panel Power Supply (lutron.com)</a> </li></ul>
Run choice of 2-conductor to Pin 1 (COM) and Pin 2 (V+) of the panel. NOTE: for QSPS-10PNL do not connect Pin 3 (MUX) and Pin 4 (MUX BAR) if controlling wirelessly.
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='A picture of the outputs on a QSPSY-10PNL'></img> 
 
Individual Plug-In Power Supply: 
<ul style='margin-bottom: 0in;margin-top: 0px;'><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'>QSPS-P1-1-35V - <a target='_blank' href='https://assets.lutron.com/a/documents/085329_QS_Link_Power_Supply_35V.p… style='font-size: 12.0pt;font-family: 'Times New Roman', serif;color: blue;'>QS Link Plug-In Power Supply (lutron.com)</a> </li><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'>QSPS-J-1-35V - <a target='_blank' href='https://assets.lutron.com/a/documents/085544.pdf'>Junction Box Power Supply; QSPS-J-1-35V (lutron.com)</a> </li></ul>
Connect the power wire (RED) to 35 V terminal and common wire (BLACK) to COM terminal. 
<div align='center' style='margin: 0in;text-align: center;line-height: normal;font-size: 11pt;font-family: Calibri, sans-serif;'><hr align='center' width='100%' size='2'></hr></div>
<a id='Step4' target='_blank'></a>Step 4: Wire the Shade 
<ol start='1' style='margin-bottom: 0in;margin-top: 0px;'><li style='line-height: normal;margin-top: 0in;margin-right: 0in;margin-bottom: 8pt;font-size: 11pt;font-family: Calibri, sans-serif;'>Wire 4-pin terminal block (provided) to cable using the included screwdriver. Tighten screws securely on the exposed wire. Leave 1/16 in (2 mm) of exposed copper to ensure insulation is not pinched. </li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Showing the 4-pin terminal block and the only two spots used.'></img> 
<ol start='2'><li>
Plug a 4-pin terminal block on the cable to the shade or drape the drive terminal block. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Image of where the 4-pin terminal block will connect to the shade's adapter.'></img> 
<ol start='3'><li>
Plug in the wireless receiver to the shade or drape drive. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='How to and where to connect the Wireless Adapter to the shade.'></img> 
<hr></hr>
<a id='Related' target='_blank'></a>Related Articles
For more information on wiring a shade for wired communication, please see our <a href='https://support.lutron.com/us/en/product/shades/article/installation/Wi…; target='_blank'>Wiring a Sivoia QS or Palladiom Shade for Power and Communication</a> Article.
<div id='' style='left: 20px;top: 2341.25px;'> </div>
<div id='' style='left: 71.3875px;top: 3226.4px;'> </div>

ShortDescription_S

This article will cover hardwiring a Sivoia QS Wireless or Palladiom Wireless shade for power via the 10-output panel or individual power supply.

SalesforceArticleId_S

ka0PY0000001q2zYAA

ArticleNumber_S

000002918

RecordType_S

How To

SurveyUrl_S

https://lutron.surveymonkey.com/r/CQHRSNT

Order

0.00

isSync

Title_S

Wire Your Sivoia QS / Palladiom Wireless Shade for Power

LikeCount

DislikeCount

isActive_S

MetaTitle

Wire Your Sivoia QS / Palladiom Wireless Shade for Power

MetaDescription

This article will cover hardwiring a Sivoia QS Wireless or Palladiom Wireless shade for power via the 10-output panel or individual power supply.

URL Mapping Machine Name

Wiring-a-Sivoia-QS-Palladiom-Shade-for-Power-with-RF-Wireless-Communication

PageTitle

Wire Your Sivoia QS / Palladiom Wireless Shade for Power

Grouping_S

Shades

installation

Product Page

Shades