<p><br><span style='font-size: 16px;'><strong>Step 1: Confirm that you have a Lutron Sivoia QS or Palladiom shade by identifying the button style. </strong></span></p>

<p>The Sivoia QS and Palladiom drives have 4 buttons separated in the middle by an LED Indicator Light. There is a black rectangular button and a white rectangular button on one side of the Indicator Light. On the other side of the indicator light is a counterclockwise arrow button and clockwise arrow button. <br><br><strong>QS Drive End:</strong></p>

<p style='text-align: center;'>   <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p><br><strong>Palladiom Drive End:</strong></p>

<p style='text-align: center;'>              <img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…;                   </p>

<p><span style='font-size: 16px;'><strong>Step 2: Cabling - Determine which gauge wire is required depending on the distance of the run from shade to panel. </strong></span></p>

<p style='text-align: center;'><img class='' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…;  <br> </p>

<p><span style='font-size: 16px;'><strong>Step 3: Wire the Power Supply </strong></span><br> </p>

<p><strong>10-Output Panels:  </strong></p>

<ul><li>
<p>QSPS-10PNL - <a href='https://assets.lutron.com/a/documents/085335.pdf&#039; target='_blank'>Sivoia QS Smart Panel Power Supply (lutron.com)</a> </p>
</li></ul>

<ol start='1'><li>
<p>Run choice of 4-conductor wire to Pin 1 (COM), Pin 2 (V+), Pin 3 (MUX), and Pin 4 (MUX BAR).  </p>
</li></ol>

<p> </p>

<p style='text-align: center;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p> </p>

<p><strong>Individual Plug-In and J-Box Power Supply:  </strong></p>

<ul><li>
<p>QSPS-P1-1-35V - <a href='https://assets.lutron.com/a/documents/085329_QS_Link_Power_Supply_35V.p…; target='_blank'>QS Link Plug-In Power Supply (lutron.com)</a> </p>
</li><li>
<p>QSPS-J-1-35V - <a href='https://assets.lutron.com/a/documents/085544.pdf&#039; target='_blank'>Junction Box Power Supply; QSPS-J-1-35V (lutron.com)</a> </p>
</li></ul>

<p> </p>

<ol start='1'><li>
<p>Connect the power wire (RED) to the 35 V terminal and the common wire (BLACK) to the COM terminal. Then, connect MUX (GREY) and MUX Bar (PURPLE). </p>
</li></ol>

<p> </p>

<p style='text-align: center;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p> </p>

<p><span style='font-size: 16px;'><strong>Step 3: Wire the Shade </strong></span></p>

<ol start='1'><li>
<p>Wire the 4-pin terminal block (provided) to the cable using the included screwdriver. Tighten screws securely on the exposed wire. Leave 1/16 in (2 mm) of exposed copper to ensure insulation is not pinched. </p>
</li></ol>

<p style='text-align: center;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<ol start='2'><li>
<p>Plug the 4-pin terminal block on the cable to the shade or drape drive terminal block. </p>
</li></ol>

<p style='text-align: center;'><img alt='image.png' src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<div id='' style='left: 212.578px;top: 619.156px;'> </div>

<div id='' style='left: 105.888px;top: 2875.8px;'> </div>

<div id='' style='left: 142.175px;top: 558.203px;'> </div>

<div id='' style='left: 42.0875px;top: 910px;'> </div>