<p><span style='font-size: 16px;'><strong>Step (1): Confirm that you have a Lutron Triathlon shade by the button style. </strong></span></p>

<p><strong>Roller Shades -</strong> The Triathlon roller shade features a single LED-equipped control button (the ‘Shade Button’), located on the Electronic Drive Unit on the left or right-hand side of the headrail. </p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 328px;height: 242px;'></img></p>

<p><strong>Honeycomb - </strong>The Triathlon Honeycomb shade features a single LED-equipped control button (the ‘Shade Button’), located on the Electronic Drive Unit (EDU), in the headrail near the center of the shade. </p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 354px;height: 195px;'></img></p>

<p><strong>Wood Blinds - </strong>The Triathlon Wood Blind features a single LED-equipped control button (the ‘shade button’), located on the Electronic Drive Unit (EDU), in the headrail near the left end of the blind. </p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 294px;height: 249px;'></img></p>

<p><strong>4 Button Shades -</strong> If your shade has 4 buttons it is a Sivoia QS, Sivoia QS Wireless, or Palladiom Shade and you should refer to the following link for:   <a href='https://lutrono365-my.sharepoint.com/:w:/g/personal/bwood_lutron_com/Eb…; target='_blank'>Programming a Lutron Sivoia QS Shade to a Remote</a> </p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 217px;height: 211px;'></img><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…;

<p><span style='font-size: 16px;'><strong>Step 2: Wiring the Power Supply </strong></span></p>

<p><strong>10-Output Panel:  </strong></p>

<ul><li>
<p>CSPS-P1-10-6 - <a href='https://assets.lutron.com/a/documents/085-276%20Cellular%20PwrPnl%20Spe…; target='_blank'>10-Output Power Panel for Serena® and Sivoia® QS Triathlon® Roller Shades (lutron.com)</a> </p>
</li></ul>

<ol start='1'><li>
<p>Run choice of 2-conductor wire to the panel. Connect Black to the COM terminal block and red to the 12 V block. </p>
</li></ol>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; style='width: 406px;height: 438px;'></img> </p>

<p> </p>

<p><strong>Individual Plug-In Power Supply:  </strong></p>

<ul><li>
<p>CSPS-P1-1-6 - <a href='https://www.serenashades.com/media/pdfs/Individual_Plug_In_Power_Supply…; target='_blank'>Triathlon Individual Plug-In Power Supply (lutron.com)</a> </p>
</li></ul>

<p><span style='font-size: 16px;'><strong>Step 3: Wiring the Shade </strong></span></p>

<p><strong>10-Output Panel: </strong></p>

<p>1. Cut the 15’ power whip to size from the shade and strip back.  </p>

<p>2. Mate the shade wires up to the 2-conductor house wiring with wire nuts. </p>

<p><strong>Individual Plug-In Power Supply:  </strong></p>

<p>      1. With the shades power wire routed clear of the shade and secured in a position where it will not interfere with shade movement, connect the individual power supply to the power wire via the barrel plug.   </p>

<p style='text-align: center;'><img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; </p>

<p>2. Plug the individual power supply into a compatible electrical outlet. The Shade Button LED flashes red/green 3 times when the shade powers up.  </p>
 

<div id='' style='left: 248.188px;top: 2337.3px;'> </div>