How to Set Limits on Your Palladiom Wire-Free Shades

<h2>Setting Limits on your Palladiom Wire-Free shades in a standalone application</h2>
A standalone application means that your Shades are not already paired to a Lutron Smart Home System, such as Caseta Wireless, RadioRa, or Homeworks 
<hr></hr>
Knowledge Article Contents:
<ol><li style='font-size: 16px;'><a href='#Before' target='_self'>Before we begin</a></li><li style='font-size: 16px;'><a href='#Step1' target='_self'>Confirm that you have a Lutron Palladiom Wire-free shade</a></li><li style='font-size: 16px;'><a href='#Step2' target='_self'>Verify Standalone Operation</a></li><li style='font-size: 16px;'><a href='#Step3' target='_self'>Enter Limit Set Mode</a>
<ul><li style='font-size: 16px;'><a href='#Pico' target='_self'>Using a Pico Remote</a></li><li style='font-size: 16px;'><a href='#FourGroup' target='_self'>Using a 4-Group Remote</a></li></ul>
</li></ol>
<hr></hr>
<h3><a id='Before' target='_blank'></a>Before we begin</h3>
Please note: You must have a Wireless Control assigned to it with a Raise and Lower button such as a <a href='https://assets.lutron.com/a/documents/369612.pdf' target='_blank'>Pico Remote</a> or <a href='https://assets.lutron.com/a/documents/085314.pdf' target='_blank'>4-Group Shade Remote</a>.
To set limits the Wireless Control must be assigned to the shade, please see our <a href='https://support.lutron.com/us/en/product/shades/article/programming/Pro…; target='_blank'>Programming a Palladiom Wire-Free Shade to a Remote</a> article. 
<hr></hr>
<h3><a id='Step1' target='_blank'></a>Confirm that you have a Lutron Palladiom Wire-Free shade by the button style. </h3>
<h3> The roller shade features a single LED-equipped control button (the ‘Shade Button’), located on the Electronic Drive Unit (EDU or Drive) on the left- or right-hand side of the headrail. These shades are exclusively battery powered.</h3>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='The button on the Palladiom Wire-Free Shade' height='262' width='387'></img>
<hr></hr>
<h3><a id='Step2' target='_blank'></a>Verify standalone operation </h3>
The Shade Button is used to activate and indicate various steps while assigning and programming the shade for compatible handheld or system-based remote control. 
<ol start='1'><li style='font-size: 16px;'>
Press the Shade Button on your Palladiom Wire-Free shades and observe for a solid green indicator light. 
</li></ol>
<ol start='2'><li style='font-size: 16px;'>
If the green indicator light remains illuminated, this indicates the limits of the shade are ready to be set. <a href='#Pico' target='_self'>Click here</a> if you are using a Pico remote control or <a href='#FourGroup' target='_self'>Click here</a> if using a Lutron 4-Group remote control. 
</li></ol>
<ol start='3'><li style='font-size: 16px;'>
If the green indicator light turns off within one second, this means your Palladiom Wire-Free shade is connected to a Lutron smart home system. In this case, you must pair your Wireless Control to your Palladiom Wire-Free shade through your Lutron system. a. If a Caséta Smart Bridge or a RA2 Select system is installed, use the Lutron App to program and control the shade. b. If a RadioRA 3 or HomeWorks system is installed, use the Lutron Designer software to program your shade. Please visit our <a href='https://www.lutron.com/en-US/Pages/WhereToBuySelection.aspx' target='_blank'>Where to Buy</a> to find a local trained and certified Lutron Dealer. 
</li></ol>
<hr></hr>
<h3><a id='Step3' target='_blank'></a>Enter Limit Set Mode</h3>
<a id='Pico' target='_blank'></a>For Pico Wireless Remotes 
A. Lower Limit: 
<ol start='1'><li style='font-size: 16px;'>
While the shade button is illuminated, hold the Open and Raise buttons simultaneously on the Pico for about 10 seconds until the shade button blinks and remains lit. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Holding the Open and Raise button on a Pico Remote' height='179' width='236'></img> 
<ol start='2'><li style='font-size: 16px;'>
Use the Pico’s Raise and Lower buttons to adjust the shade position to the lower limit you prefer. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Pressing the Raise and Lower button on a Pico Remote' height='189' width='236'></img> 
<ol start='3'><li style='font-size: 16px;'>
Hold the Close button on the Pico for about 10 seconds until the shade button blinks and turns off. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Pressing and Holding the close button on a Pico Remote' height='198' width='236'></img> 
B. Upper Limit: 
<ol start='1'><li style='font-size: 16px;'>
Follow Steps 1- 2 of the Lower Limit steps. 
</li></ol>
<ol start='2'><li style='font-size: 16px;'>
Hold the Open button on the Pico for about 10 seconds until the shade button blinks and turns off. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Pressing and Holding the Open Button on a Pico Remote' height='198' width='236'></img> 
To set the limits on additional shades, repeat the process above starting with the <a href='#Step2' target='_self'>Shade Button press</a> for each Palladiom Wire-Free shade. 
<a id='FourGroup' target='_blank'></a>For 4-Group RF Remote Controls 
A. Lower Limit: 
<ol start='1'><li style='font-size: 16px;'>
While the shade button is illuminated, hold the Open and Raise buttons simultaneously on the 4-Group Remote until the shade button blinks and remains lit. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Pressing the Open and Raise buttons on the 4-Group Remote' height='211' width='270'></img> 
<ol start='2'><li style='font-size: 16px;'>
Use the control’s Raise and Lower buttons to adjust the shade position to the lower limit you prefer. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Pressing the Raise and Lower buttons on the 4-Group Remote' height='207' width='270'></img> 
<ol start='3'><li style='font-size: 16px;'>
Hold the Close button on the 4-Group Remote for about 10 seconds, until the shade button blinks and turns off. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Holding the Close button on the 4-Group remote' height='213' width='270'></img> 
B. Upper Limit: 
<ol start='1'><li style='font-size: 16px;'>
Follow Steps 1- 2 of the Lower Limit steps. 
</li></ol>
<ol start='2'><li style='font-size: 16px;'>
Hold the Open button on the 4-Group Remote for about 10 seconds until the shade button blinks and turns off. 
</li></ol>
<img src='https://lutron.my.salesforce-sites.com/publicknowledge/servlet/rtaImage…; alt='Holding the Open button on the 4-Group Remote' height='212' width='270'></img> 
To set the limits on additional shades, repeat the process above starting with the <a href='#Step2' target='_self'>Shade Button press</a> for each Palladiom Wire-Free shade.

ShortDescription_S

This article will cover setting limits on your Palladiom Wire-Free shades in a Standalone application.

SalesforceArticleId_S

ka0PY0000001oQzYAI

ArticleNumber_S

000002905

RecordType_S

How To

SurveyUrl_S

https://lutron.surveymonkey.com/r/CQHRSNT

isSync

Title_S

How to Set Limits on Your Palladiom Wire-Free Shades

LikeCount

DislikeCount

isActive_S

MetaTitle

How to Set Limits on Your Palladiom Wire-Free Shades

MetaDescription

This article will cover setting limits on your Palladiom Wire-Free shades in a Standalone application.

URL Mapping Machine Name

Setting-Limits-on-a-Palladiom-Wire-Free-shade-using-a-Remote

PageTitle

How to Set Limits on Your Palladiom Wire-Free Shades

Grouping_S

Shades

programming

Product Page

Shades